Performance Classic 900 Engine Mount Kit - Hydraulic Style
This engine mount is designed to replace the hydraulic-style mounts used on most classic 900s. Hydraulic mounts were used '87-onwards for the sides on all 900s and the fronts on the turbos. Over time and when engines are modified, the mounts do a poor jobs of keeping the engine and transmission in place. Since the transmission is linked through a single piece shaft, any mis-alignment can cause excess shifter movement or popping out of gear. Many poor quality aftermarket mounts exist that resume the factory shape, but offer little in terms of performance or longevity.
Although this mount is to be designed to be used universally in all locations , the front location is recommended first , followed by the passenger side for high-horsepower applications. The more of these mounts used, the more vibration will be felt. In race applications , all three are recommended. If used in the driver side location, the "J" bracket must be removed for clearance.
Machined from a billet block of 6061 Aluminum and utilizing an off-the-shelf Powerflex bushing insert, this mount will last the lifetime of the vehicle. Mounting hardware included. Made in the USA
Performance Barrel Engine Mount is now also available.
Installation Notes: O-ring provided to keep bolt in place while fitting the mount to the front position. If provided with a thick and thin fender washer, the thick washer goes on the top of the front position.